Paste (Ctrl + V) your article below then click Check for Plagiarism!
Plagiarism refers to a text that has been copied or that is not original. This could imply that either the entire text provided has been copied or has been submitted as an original piece of work. This refers to the act of claiming someone else’s work as your own. Plagiarism is trying to take credit for and receive rewards for representing yourself as the author of a piece of work.
Plagiarism can also occur when a person re-uses their work for a different purpose. This is referred to as Plagiarism only if the person claims to have worked on the plagiarised document for the latter occasion. For example, assume that you write an article in 2010 on smartphones. Now, in 2020, you wish to publish a paper for a different publishing house on the same topic. If you take excerpts from the original article and do not cite it correctly it is considered plagiarism. Or if you claim that a specific “old” idea is a new concept, then your work will be labeled ‘Plagiarized’.
Plagiarism done to an extreme level can be considered a forgery. Such a form of plagiarism is penalized by the judicial system and may lead to plagiarizing a person to be jailed. Yet, Plagiarism is often done mistakenly. Where people are not aware of copyright or trademark on a particular text and claim ownership of the concept. Plagiarism is often seen as a dishonest thing to do and reflects poorly on the person who is plagiarizing. Thus, it is important to perform a check for plagiarism before presenting or submitting your work.
Plagiarism refers to the act of presenting someone else’s work as yours and accepting rewards or acclaim for the same. This plagiarism is not only looked down on and frowned upon but has a deeper last impact on the life of the plagiarizing person. As writers, students, and academics it is our responsibility to ensure that you do fall into the plagiarism trap. If you check for plagiarism and it turns out that sections of your work have been plagiarized then you must take a course of action. This course of action will determine how you rectify your plagiarized work to set things correct. There is a multi-faceted impact that plagiarized work will have on the life of the author. Here are some major points of impact:
1. Academic: as an academic, if your work is seen as plagiarized then this will hurt you drastically. The academic community is one of hard work, resilience. Dedication, and perseverance. This community respects small contributions within a field. But they respect so long as those contributions are well-earned and original. But, this community will turn against a fellow whose work has been plagiarized.
Plagiarism of work by a writer will be very damaging to their previous work as well. Plagiarism is seen as a sign of disrespect and is often seen as retaliation within the community. Academic work revolves around collaborations and collusions. However, having a plagiarized author in your mix alerts the other academics. This leads to aversion by scholars to working with someone whose paper has shown plagiarism. Academics with plagiarized papers are widely dis-credited and are considered thieves. Their reputation takes a massive hit. Plagiarized work, causes that author to be boycotted by others. The author’s past achievements and contributions are out under a microscope and looked at as undeserved.
2. Legal: plagiarism can cause legal authorities to take action as well. In a world that is growing rapidly and seeing an increase in every niche, intellectual property is becoming more and more important. You may have an idea that you believe to be original and excellent. You may work on this and expand upon it, only to find out that a paper was published in your area of study by someone 10 years ago. The ideal way to deal with this is to reach out and contact the original writer. This will allow collaborating in how aftermath or negotiating. However, a failure to do either will have dire repercussions. Inability to reach out to the original author and working on your study may lead to someone alerting legal authorities.
Copyright infringement is a serious offense and is considered something gravely wrong. It may lead to a slap on the wrist and a warning. This will lead to people reaching out and discrediting you. You may be put on trial and questioned about the legitimacy of your work. Your professionalism will be put in question, while you may be left defending yourself. Plagiarism can also lead to you paying monetary fines to the original writer of your idea, section, or paper. Therefore, we suggest you avoid plagiarism to the best of your abilities. Utilize citation and referencing in order to make sure that you do not plagiarize.
3. Personal: Once your work has been detected for plagiarism there is a high chance that everything that you have worked for is questioned. This will include questioning your motives for working with people. Collaborators will become more hesitant in showing their research to you. Your professional integrity that took time to be built will have doubters. You may be questioned by colleagues or by your employers. In most developed countries, you will have to face a disciplinary committee to discuss why you have plagiarized your work. Your future work may be looked at sideways. The legitimacy of it is questioned and your work may be called copied or unauthentic. This can have a lasting impact on a person’s personal life while weighing on their consciousness.
Therefore, if you have the opportunity to verify your work for plagiarism it is best to check it. By checking plagiarism in your work, you ensure that you have not copied someone else’s work. You are free to acknowledge that the work submitted is entirely your idea and your work. This discord following the detection of plagiarism on your work is best to be avoided. Thus, checking for plagiarism before submitting work is the ideal and smartest strategy!
Plagiarism Checker is a very useful tool that can be used to detect copied material. When checking if a document is original or not, a plagiarism checker is useful. This tool helps to detect copied or unoriginal work. The plagiarism checker will highlight the portion of your text that is copied. It will also tell you how much of the text is plagiarised (percentages). SEO To Checker’s Plagiarism checker is a free and very powerful tool. It has unique software that analyzes your text and looks at copies of the same text on the internet. The usage of this plagiarism checker is super simple, follow the following steps:
1. Go to your article, text, report, or content that you wish to analyze. To check if the work has been unwittingly plagiarized.
2. Copy the text or the article.
3. Come on to SEO To Checker’s homepage
4. Go to the “type any word to search for SEO tools”. Type “plagiarism checker” and click on the tool option.
5. Go to the search bar of this tool and paste the text of your content or article.
6. Press submit and view the results.
SEO To Checker’s plagiarism checker is a very useful and accurate tool. It helps you detect any mistake of research by you. It will help you find that mistake and make possible changes to rectify it.
The process followed for detecting plagiarism by our tool is excellent and yet simple. SEO to Checker’s Plagiarism Detector is the best online plagiarism detector. This plagiarism checker is easy to use, free, and very accurate. It is the best plagiarism checker online due to the ease in the navigation of this tool. When checking for originality within your document our tool ensures that it analyzes every detail within your text. The following displays the way in which our tool utilizes its software to assess your text, to find plagiarism:
This tool breaks down your article, provided into small strings of sentences. It analyzes your text and picks up on changes within the text. Our plagiarism detector tool finds changes in tones within your article. Based on these tones, it breaks up your text and creates individual strings of the text. These singular strings are analyzed against the internet results for the same. The breakdown of the text into smaller strings helps us in our process of checking plagiarism.
The broken-down smaller strings are then analyzed against search engine results for the same string text. As and how the results are shown, our tool analyzes each result against your string to see similarities. If a majority of similarities are detected our tool classifies that string as plagiarized.
If the plagiarism checker finds a string that is not original it will highlight it. In doing so, it will indicate to you, which section of your text needs to be changed or edited. This will help you greatly because plagiarised work is looked down upon and rejected. If a string is unique and original, it will have resulted in the same. The plagiarism checker will highlight that the text string is “good” if it is original. It will proceed to mark the plagiarized string as “Already exists”, suggesting you drop it or change it.
As observed due to our excellent process we are a highly advanced plagiarism checker. We can provide you with accurate results. This solidifies our status as a free advanced plagiarism checker on the market.
Plagiarized text may not always be useless. Most times, only a portion of your article will be plagiarized. As a professional or a student, you can rectify the mistake. Plagiarized work can be worked on to make it not a copy. You can make changes to plagiarized work that will make it eliminate some of the plagiarism within your text. But the first step in doing this is to use the plagiarism detector. The following are our recommendations:
If you are a student or a professional writer, plagiarism is like a death sentence for the section of your essay that is plagiarized. Therefore, to avoid any further problems or mistakes avoid including this section altogether. This will relieve you of the stress of knowing that your work is plagiarized and you will not be graded well. However, by removing this portion of plagiarized work you are free of a burden. After editing out the plagiarized section, you can look for alternatives to use within the article or essay.
Plagiarized portions of write-ups mean that you have copied a published section, word-to-word from someone else’s work. This will often lead to detection by any decent plagiarism checking tool. You will need to paraphrase that section to a great degree. Rewriting implies that you prefer having the plagiarized section within your text but not in as it is. Therefore, you rewrite and restructure the basis of the plagiarized work. This will lead to additions and changes within the original idea. This approach shows perseverance within the writer, refusing to drop a valuable string of information.
This can be done by you, using your creativity and willingness to do so. This can be done by an outsourced writer. Outsourcing is often looked upon as unethical for writers and students. It may also lead to some very serious penalties if this fact comes to light. Leaving you with only one option, which is using a reliable tool to do this for you. This will not only help you save time but will give you the liberty to choose which version of the paraphrasing you prefer. SEO To Checker’s article rewriter is such a tool. It a very powerful and useful tool. This allows you to restructure your sentences and uses great synonyms. It provides you with alternatives to words, sentences, and phrases overall. Allowing you to use an idea but not the words presenting the idea.
As a student or professional, you can always turn plagiarism around to your benefit. Before submitting any work ALWAYS check for plagiarism. If you detect plagiarism you can use this to your advantage. Referencing shows academic integrity and maturity, giving credit to where it belongs. Providing your reader a holistic picture as per your journey into finding your consensus. This is a very crucial aspect of writing and researching. Using the plagiarism checker should be implemented wherever possible to avoid penalization from plagiarism.
By proper usage of references and citations, you give your work an additional level of reliability. You can give your reader the satisfaction that you (the author) have done your research for the topic at hand. There are a few different types of referencing styles that you can follow within your text. Different organizations of study or employment have different preferred styles. Ensure you enquire as per their preferred format of referencing style that is acceptable to your organization. The following are the types:
1. APA: this is a style of referencing used by colleges and other academic institutions throughout the world. This style is simple and easy to follow. Simply input the name of the author within brackets, followed up by the year of the publication and the page number. For example, assume I wrote an article and took an excerpt from Josh Radner’s Book called ‘2 angry boys’, published in 2006. An APA style reference will look like this; (Radner, 2006, pg 21).
2.Harvard: this style of referencing includes in-text and bibliography types of referencing. This is a holistic approach for doing referencing and helps the reader greatly to track each source used to create the academic work. This will require the last name of the author followed by his first name, which is then followed by a year of publishing after a comma. These are then followed up by the page number of the original work. For example Radner, Josh(2006, p 54).
This would be followed up by the information about the citation for the plagiarized form at the end of the paper’s bibliography. This includes the full name of the author, the name of the publishing house, the title, and the year of publishing the book. Along with the page number.
3.Chicago: This refers to the Chicago Manual of style. This uses a combination of different referencing types that are notes and in text. Therefore, you can attribute this to being a combination of the Harvard and APA type of referencing.
toto4.Oxford: This type of referencing is the most different compared to all the other examples. This is a footnote citation rather than an in-text citation or a bibliography. This entails adding a number to a text that is supposed to be cited. This number is repeated on the footnote and the corresponding citation is added to the bottom of the page.
Plagiarism refers to the act of cheating or copying someone else’s work and displaying it as your own. This may be done on purpose, with the hopes of not getting caught. Or plagiarism may be done unwittingly. Either way, it is an academic offense and is treated with distaste and disgust by others within your industry.
Plagiarism is a grave error on your part but can be done unknowingly. However, the intention behind plagiarism seldom affects the aftermath that follows. There may be legal repercussions, wherein you are sued for copyright infringement. You may be asked to appear in court and defend your actions. This copyright infringement may lead to either a slap on the wrist or a monetary fine.
Plagiarism can have dire consequences in your academic life as well. Your professionalism and integrity are put into questioning. Your past work is reflected upon as perhaps being copied as well. There may be checking for plagiarism of your past papers. This aftermath how all will affect the aftermath to your mental psyche and will wear you down. Hence, instead of succumbing to the aftermath, we recommend that you perform a plagiarism check before submitting your work.
Detecting plagiarism is easy, by the utilization of our plagiarism checker tool. You simply need to input your text for a plagiarism check and submit it. Our plagiarism detector will break down your text into smaller parts, called strings, to be analyzed. These parts will be compared against sources on the search engines. If nothing is similar to your strings that will be recorded by the plagiarism detector. The plagiarism detector will provide you with the “Good” result regarding the uniqueness of the strings. If your work shows signs of similarity from a pre-existing piece of work that is not good. This would imply that your work is plagiarized and is not unique. The plagiarism detector will give you the result of ‘not unique’ for your string and work.
Plagiarism is not the end of everything, even if your work revolves around writing. There are a few short ways that you can make your content, or text free of plagiarism. These methods to rid your work of plagiarism include editing, rewriting, and referencing. Each displays a different trait within a writer. Editing will remove your plagiarized section entirely. This will occur if you do not accept anything other than original in your work, it shows integrity. You can always rewrite the plagiarized text. This allows you to rephrase and put into your words the section which is not original. The last and most commonly used technique to dealing with plagiarism is referencing. Depending on your stature, profession, and place of work, referencing can be done differently. We have provided a list of all different referencing styles and ways to follow these styles.